Support for All Common Battery Chemistries & Voltages
Including Lead Acid, Lithium (LiFePO4), Standard AGM, TPPL AGM, Carbon Foam AGM, and GEL Batteries
Supports 12V-48V Battery Banks
Typically 97% Accurate within 2 Cycles
Auto-Calibrating
Does not Lose Accuracy with Age
Large, Bright Color Display
Sunlight Readable, Configurable & Dimmable
60 Degree Viewing Angle
Fits in Standard 2 1/16″ Gauge Socket
Expandable Architecture
Support Multiple Displays (Optional)
Supports Multiple Battery Banks (Optional)
Standard Support for 2 Start Batteries (Voltage Only)
Simple, easy-to-install Point-to-Point Network
Optional Smartphone/Bluetooth® Gateway
Free iOS and Android Apps (Requires Bluetooth® Gateway PN SG2-0300)
View All Parameters on your Phone
Download Product Updates
Balmar has combined recent technology advances to introduce a next generation battery monitor. The SG200 is quite simply the most accurate battery monitor available today.
Balmar has combined the best features of its 1st generation Smartgauge™ with many advantages of a shunt-based amp-hour counting system. Further, we’ve designed a device architecture which facilitates multiple gauges or multiple shunts to be added to the network-allowing the boater to monitor multiple energy storage banks simultaneously from multiple locations.
In addition, the SG200 Color Display is easy to read, configurable and fits any standard 2 1/16″ gauge socket. Now you can determine your battery(s) condition from anywhere on the vessel or vehicle with multiple displays, or simply add the optional Bluetooth® Smartphone App to keep information in your pocket!
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf) Owner's Manual (pdf)
Small, easy to handle, and does an amazing job of both inflating and delating large fenders and low-pressure inflatable items. Only inflates to 1 psi (enough for the fenders) The 20V battery last a long time. I use a 2 stage pump for inflating the items which require 6 to 15 psi of pressure but, I use this pump to deflate the high pressure toys because it is convenient.
Not sure why they designed it the way they did, but the straps should be attached to the fender. They are very difficult to attach to the piling while holding and bending the fender to fit the piling. Once installed it’s also difficult to pull the straps tight enough so it doesn’t slide down the piling. Once installed it works fine and protected our rail from scraping so if you can install it, you’ll enjoy it.
![Balmar SG200 Battery Monitor Kit w/Display Shunt 10M Cable - 12-48 VDC [SG200]](http://www.innovativemarinegroup.com/cdn/shop/products/74959XL.jpg?v=1654260299&width=1445)