Heavy duty, self-priming, hand-powered bilge pump for nearly any type of installation
Viking Universal's mounting bracket allows for vertical or horizontal surface mounting. With the optional Through Deck kit the pump can be installed behind bulkheads or below the deck. To minimize required space the Viking Universal excels at adaption. The simple switching of the valves together with the connections allows you to choose flow direction. The included KlickTite™ straight and 90° hose connections can be used in combination. The hose connections and even the pump housing can be easily rotated for optimal positioning.
While designed as a powerful bilge pump, the Viking Universal's large 38mm (1-1/2") valves enable the pump to also be used for pumping toilet waste.
Fasteners are included for stowing the handle and the safety clasp ensures that the handle cannot be lost while not in use or during an emergency situation. Viking Universal meets ISO 15083, "Bilge pumping systems".
Specifications:
Body and cover:Polypropylene plastic reinforced with 30% fiberglass
Small, easy to handle, and does an amazing job of both inflating and delating large fenders and low-pressure inflatable items. Only inflates to 1 psi (enough for the fenders) The 20V battery last a long time. I use a 2 stage pump for inflating the items which require 6 to 15 psi of pressure but, I use this pump to deflate the high pressure toys because it is convenient.
Not sure why they designed it the way they did, but the straps should be attached to the fender. They are very difficult to attach to the piling while holding and bending the fender to fit the piling. Once installed it’s also difficult to pull the straps tight enough so it doesn’t slide down the piling. Once installed it works fine and protected our rail from scraping so if you can install it, you’ll enjoy it.
![Johnson Pump Viking Universal Manual Bilge Pump - 38mm [10-13530-01]](http://www.innovativemarinegroup.com/cdn/shop/products/53590XL.jpg?v=1654234709&width=1445)